This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
DHS 163.20(8)(a)1.b. b. Describe the symptoms of lead poisoning and health risks to children and adults exposed to lead.
DHS 163.20(8)(a)1.c. c. Explain why lead, dust and debris are a special concern in housing and child-occupied facilities.
DHS 163.20(8)(a)1.d. d. Identify the clearance standards for floors, interior window sills and window troughs.
DHS 163.20(8)(a)1.e. e. Discuss the EPA, HUD and OSHA lead regulations and their relation to renovation activities.
DHS 163.20(8)(a)1.f. f. Define target housing and child-occupied facility.
DHS 163.20(8)(a)1.g. g. Discuss requirements for training and certification under this chapter.
DHS 163.20(8)(a)1.h. h. Describe the exclusions to the renovation requirements under this chapter.
DHS 163.20(8)(a)1.i. i. Discuss company responsibilities under this chapter.
DHS 163.20(8)(a)1.j. j. Discuss the certified renovator roles and responsibilities under this chapter.
DHS 163.20(8)(a)1.k. k. Identify the major work practice standards for renovation activities under this chapter.
DHS 163.20(8)(a)1.L. L. Identify the possible enforcement actions that may be taken for violations of this chapter.
DHS 163.20(8)(a)1.m. m. Discuss the HUD lead safe housing rule requirements for training, lead-safe work practices and clearance in federally owned or assisted housing.
DHS 163.20(8)(a)1.n. n. Compare the requirements of this chapter with the EPA renovation, repair and painting rule under 40 CFR 745 Subparts E and L and the HUD lead safe housing rule under 24 CFR Part 35, Subparts B to M and R.
DHS 163.20(8)(a)1.o. o. Explain pre-renovation education requirements under this chapter.
DHS 163.20(8)(a)1.p. p. Discuss how housing age is related to the presence of lead-based paint.
DHS 163.20(8)(a)1.q. q. Describe and compare methods for determining if lead-based paint is present.
DHS 163.20(8)(a)1.r. r. Explain how to determine if a test kit is recognized for use.
DHS 163.20(8)(a)1.s. s. Correctly use a recognized test kit to determine if lead-based paint is present on components and surfaces affected by renovation work.
DHS 163.20(8)(a)1.t. t. Correctly use an EPA flow chart to determine what regulatory requirements apply to a specific renovation project.
DHS 163.20(8)(a)1.u. u. Describe the three major steps to lead safe renovation: proper setup, lead safe work practices and proper cleanup.
DHS 163.20(8)(a)1.v. v. Describe the purpose and benefits of establishing work area containment during renovation activities.
DHS 163.20(8)(a)1.w. w. Demonstrate interior work area setup and containment, including posting signs and limiting access, removing or covering furnishings and belongings, covering floors, closing doors and windows, and sealing vents.
DHS 163.20(8)(a)1.x. x. Construct a work area entry doorway and dust barrier using plastic sheeting.
DHS 163.20(8)(a)1.y. y. Demonstrate exterior work area setup and containment, including posting signs and limiting access, removing or covering furnishings and belongings; covering the ground; and closing doors and windows.
DHS 163.20(8)(a)1.z. z. Describe the differences between traditional renovation work practices and lead-safe renovation work practices.
DHS 163.20(8)(a)1.za. za. List and describe the work practices prohibited under ch. DHS 163, the EPA renovation, repair and painting rule under 40 CFR 745 Subparts E and L, and the HUD lead safe housing rule under 24 CFR Part 35, Subparts B to M and R.
DHS 163.20(8)(a)1.zb. zb. Discuss specialized power tools with HEPA-filtered exhaust control.
DHS 163.20(8)(a)1.zc. zc. Discuss proper use of personal protection equipment and hygiene practices to protect workers and control the spread of dust.
DHS 163.20(8)(a)1.zd. zd. Explain the role regular and daily cleaning plays in preventing the spread of lead hazards.
DHS 163.20(8)(a)1.ze. ze. Demonstrate proper interior and exterior work area cleaning techniques.
DHS 163.20(8)(a)1.zf. zf. Describe proper carpet cleaning procedures.
DHS 163.20(8)(a)1.zg. zg. Describe the purpose of cleaning verification after final cleanup.
DHS 163.20(8)(a)1.zh. zh. Demonstrate visual inspection for dust and debris after final cleaning.
DHS 163.20(8)(a)1.zi. zi. Demonstrate the full cleaning verification procedure.
DHS 163.20(8)(a)1.zj. zj. Describe dust clearance inspections and how they differ from cleaning verification.
DHS 163.20(8)(a)1.zk. zk. Describe exterior cleanup requirements, including final visual inspection.
DHS 163.20(8)(a)1.zL. zL. Demonstrate proper waste handling.
DHS 163.20(8)(a)1.zm. zm. Discuss federal and state waste disposal regulations.
DHS 163.20(8)(a)1.zn. zn. Describe how long required records must be maintained.
DHS 163.20(8)(a)1.zo. zo. List the records that must be kept on the job site during a renovation activity.
DHS 163.20(8)(a)1.zp. zp. List the records required for pre-renovation education activities.
DHS 163.20(8)(a)1.zq. zq. Describe how to document non-certified worker training.
DHS 163.20(8)(a)1.zr. zr. Describe the records that must be generated and maintained if using a paint test kit.
DHS 163.20(8)(a)1.zs. zs. Describe the post-renovation reporting requirements.
DHS 163.20(8)(a)1.zt. zt. Describe the role of non-certified, on-the-job trained renovation workers.
DHS 163.20(8)(a)1.zu. zu. List and discuss the use of the 7 steps to lead-safe renovation, repair and painting for training uncertified workers.
DHS 163.20(8)(a)2. 2. `Lead abatement work course.' A lead abatement work course shall provide a minimum of 8 training hours only to persons who successfully completed a department-approved lead-safe renovation course and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, a minimum of 6 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)2.a. a. Discuss the role and responsibilities of a lead abatement worker.
DHS 163.20(8)(a)2.b. b. Describe the requirements for training, certification and work practices under ch. DHS 163.
DHS 163.20(8)(a)2.c. c. Discuss employer responsibilities for worker training and protection under 29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration.
DHS 163.20(8)(a)2.d. d. Determine characteristics of a job site that can affect an abatement project.
DHS 163.20(8)(a)2.e. e. Interpret exposure measurements from personal air monitoring samples.
DHS 163.20(8)(a)2.f. f. Discuss general engineering controls used for reducing and containing dust-lead during abatement activities that generate large quantities of dust.
DHS 163.20(8)(a)2.g. g. Describe lead-based paint abatement or hazard reduction work methods.
DHS 163.20(8)(a)2.h. h. Describe restricted or prohibited work practices under s. DHS 163.14 (3) and (4).
DHS 163.20(8)(a)2.i. i. Demonstrate the removal of paint from components using machine sanding, grinding, or planing with HEPA-vacuum exhaust control attachments, and using wet sanding and wet scraping according to documented methodologies.
DHS 163.20(8)(a)2.j. j. Discuss the structural conditions required for successful use of encapsulants.
DHS 163.20(8)(a)2.k. k. Conduct a patch test for determining if an encapsulant will adhere properly.
DHS 163.20(8)(a)2.L. L. Build a mini-containment for high dust engineering control.
DHS 163.20(8)(a)2.m. m. Demonstrate the use of documented methodologies to remove and replace windows.
DHS 163.20(8)(a)2.n. n. Remove components and prepare for proper disposal.
DHS 163.20(8)(a)2.o. o. Perform the final cleaning and waste disposal required after abatement.
DHS 163.20(8)(a)2.p. p. Discuss the advantages and disadvantages of different lead hazard reduction activities.
DHS 163.20(8)(a)2.q. q. Describe exterior abatement activities, including soil-lead abatement options.
DHS 163.20(8)(a)2.r. r. Discuss engineering controls and work practice issues specific to exterior lead-based paint projects.
DHS 163.20(8)(a)2.s. s. Perform a job site preparation and set-up for an exterior abatement project.
DHS 163.20(8)(a)2.t. t. Discuss cleanup after soil and exterior abatement or lead hazard reduction.
DHS 163.20(8)(a)2.u. u. Discuss requirements for pre-cleaning and daily cleaning of abatement work areas, including worker pathways.
DHS 163.20(8)(a)3. 3. `Lead abatement supervision course.' A lead abatement supervision course shall provide a minimum of 16 training hours only to persons who have successfully completed lead abatement worker training and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, hands-on skills assessment, a course review and a written course test. The course shall provide a minimum of 6 hours of hands-on practice and hands-on skills assessment, and instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)3.a. a. Describe the role and responsibilities of a lead abatement supervisor.
DHS 163.20(8)(a)3.b. b. Discuss each of the major responsibility areas necessary to successfully manage lead abatement projects.
DHS 163.20(8)(a)3.c. c. Describe basic supervisory techniques and responsibilities for lead hazard reduction projects.
DHS 163.20(8)(a)3.d. d. Discuss the role the site supervisor plays in community relations and occupant protection.
DHS 163.20(8)(a)3.e. e. Discuss the relation of contract specifications to the actual project.
DHS 163.20(8)(a)3.f. f. Describe the various options for controlling interior, exterior and soil lead hazards.
DHS 163.20(8)(a)3.g. g. Determine appropriate lead hazard reduction methods for interior, exterior and soil hazards.
DHS 163.20(8)(a)3.h. h. Describe the requirements for using restricted lead abatement methods.
DHS 163.20(8)(a)3.i. i. Identify prohibited work practices.
DHS 163.20(8)(a)3.j. j. Describe the requirements for training, certification and work practices under ch. DHS 163.
DHS 163.20(8)(a)3.k. k. Determine when notice to the department is required.
DHS 163.20(8)(a)3.L. L. Complete a work notice form for a lead abatement project.
DHS 163.20(8)(a)3.m. m. Describe lead waste disposal requirements.
DHS 163.20(8)(a)3.n. n. Discuss employer responsibilities for worker training and protection under 29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration.
DHS 163.20(8)(a)3.o. o. Discuss employer responsibilities for worker respiratory protection under 29 CFR 1910.134.
DHS 163.20(8)(a)3.p. p. Discuss requirements for lead hazard reduction measures under 24 CFR Part 35, HUD requirements for notification, evaluation and reduction of lead-based paint hazards in federally owned residential property and housing receiving federal assistance.
DHS 163.20(8)(a)3.q. q. Discuss requirements for revising a project notice.
DHS 163.20(8)(a)3.r. r. Discuss liability and insurance issues as they relate to lead hazard reduction work.
DHS 163.20(8)(a)3.s. s. Interpret risk assessment and inspection reports as they apply to planned lead hazard reduction activities.
DHS 163.20(8)(a)3.t. t. Describe the standards for registered lead-free property and registered lead-safe property registration.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.